< Water fed pole systems, water-fed pole accessories, & waterfed purification equipment for window cleaning
Water-fed pole equipment on-line shop

Water-fed Systems LogoWater-fed Systems LogoWater-fed Systems LogoHomeShopping CartEmail SureCleanSystemsSureCleanSystem Sitemap

Products Gallery FAQHow it works
d
Browse shop
 » All water-fed products
 » Complete Systems
 » Anticorrosion Paint
 » Backpacks & Trolleys
 » Composite Vessels
 » DI Units
 » Filters
 » Hoses & Accessories
 » Poles & Brushes
 » Pole Accessories
 » RO Units
 » Safety Signs
 » TDS Meter
 » Water Pumps
 » Water Tanks



Shopping cart  Shopping cart
0 Product(s) in cart
Total £0.00
» Checkout



Login Status  Login Status
Not logged in
» Login



Welcome

As water percolates through the ground it invariably dissolves some minerals, and it is these minerals that we find on our windows and our cars after we washed with tap water these come in the form of white streaks and spots etc. after the water has evaporated.

As window cleaners we usually remove the water with a squeegee.

If the dissolved solids could be removed from the water before the cleaning process, then this would inevitably remove the problem of streaking, and that is what the pure water fed poles systems strives to do.

 

 
There are three main stages of water purification:


1 Water Softening

If your water is hard you will need the water softener (T.D.S. reading 150+)
This swaps the calcium and magnesium, which makes the water hard, for sodium, which is obtained from common salt.

We have found in our experience that this stage can be eliminated if desired, although it can be fitted to costumer requirements.


2 R.O. (Reverse Osmosis)

The next stage, Reverse Osmosis, is the most important. It involves the pre-filtration of tap water by removing particulates, down to the microns and the removal of chlorine. The RO membranes hate it, and damage will be caused if not undertaken.
So the tap water is first of all pre-filtered with a sediment filter and a carbon filter then under pressure passed over the synthetic membrane were the pure water is piped over to storage and the waste with the impurities carried off to drain.

By means of this method some 90-98 % of impurities can be removed.


3 Di-Ionising

Water is pasted through a small polishing vessel of two synthetic deionising and demineralising resins.

The water is then passed through the D.I. resin vessel where it is polished to pure water ready to be tanked and used. Using the T.D.S. meter can check the final purity of your water.

And so we developed...

With the uptake of this method in window cleaning, there are now systems that can suit even the smallest of businesses.

That is why we have developed what is known as the commercial and the residential systems.

 

What is your next step?

Well why don’t you give us a call and discuss your needs and we can advise on what may be best for you now and into the future.

We will be up front honest and give you the benefit of our experience.

 

 

Contact SureCleanSystemsAbout SureCleanSystemsOrder StatusLogon